Have you stripped the gearboxes on your drive motors leaving your bot stranded in the arena? Scared of the cost and complexity of brushless drive? I have the solution you've been waiting for. Enter Repeat Drive Brushed Mk2. More powerful motors that run cooler and give you even more performance.
Select options
This product has multiple variants. The options may be chosen on the product page
The Budget Ant DESC has been developed to provide an affordable and robust drive ESC option for Repeat Drive Brushed or any other antweight size drive motor. To address the lack of high-quality budget ESC options available for antweight robots, I searched for and evaluated multiple potential ESC sources. The result? Repeat Robotics Budget Ant DESC. This is a customized…
$50.00Original price was: $50.00.$45.00Current price is: $45.00.
Rated 5.00 out of 5
Looking for something to simplify the wiring of your robot? The Repeat AM32 Dual Brushless Drive ESC makes the insides of your bot neat and tidy while delivering high performance in a tiny package. Running the latest AM32 software, this ESC punches above its size.
Does your beetleweight need more drive power? Not happy with any of the options on the market? Tired of trying to put your own shafts into a 2xxx motor to get all the torque??? Repeat drive max V2 is an improvement on the original. It comes with a 2100kv 2006 brushless motor mated to a 24mm 27:1 planetary gearbox designed…
Select options
This product has multiple variants. The options may be chosen on the product page
Need a cheap way to attach foam wheels to your bot? Want gold rims on your next bot? Repeat Foam Eco Hubs are here! Designed for maximum performance at a low price, these hubs look great while doing it! Now with a second generation design boasting several improvements on the first version!
Select options
This product has multiple variants. The options may be chosen on the product page
Repeat Drive Axle is a 1/4" flanged, 7075 aluminum standoff, designed to be used in Beetleweight drive applications. An increasing amount of insect weight combat robots use plastic frame rails, these axles have a flanged section to keep them perpendicular to your frame and your drive running smooth.
Select options
This product has multiple variants. The options may be chosen on the product page
Need a switch to safely power your robot on or off? The fingertech switch has been used by builders for decades and is great for 2S-4S 1lb and 3lb robot systems! Pick yours up from repeat robotics today!
Repeat Drive Axle Ant is a 5mm flanged, 7075 aluminum standoff, designed to be used in Antweight drive applications. An increasing amount of insect weight combat robots use plastic frame rails, these axles have a flanged section to keep them perpendicular to your frame and your drive running smooth.
Select options
This product has multiple variants. The options may be chosen on the product page
Introducing repeat compact, the lightest brushless beetle drive motor on the market! Lightweight doesn't sacrifice build quality or durability, this motor has a hardened steel 4mm billet output shaft. Power comes from a brushless 1806 motor integrated directly into the gearbox! Similar 1806 brushless motors with 22mm planetary gearboxes have driven beetleweights for years!
Select options
This product has multiple variants. The options may be chosen on the product page
Does your antweight suffer from a lack of drive power? Have you stripped the gearboxes on your drive motors leaving your bot stranded in the arena? I too have suffered from these problems. That's why I started developing the first off-the-shelf 16mm brushless gearmotors to be sold to combat robot builders. Repeat drive mini Mk4 is the upgraded version of…
Select options
This product has multiple variants. The options may be chosen on the product page
Looking to simplify your wiring? Hate splicing wires together? The Repeat Power Distribution Board does away with ugly wiring with a compact and simple solution for ants and beetles!
Need a cheap way to attach custom wheels to your next bot? Repeat robotics Gold Screw Hub are designed to custom mount antweight and beetleweight bots wheels!
Select options
This product has multiple variants. The options may be chosen on the product page
These belts are perfect for four wheel drive Antweight or Beetleweight designs! Sourced for our popular Peter Bar Kit robot, you know these belts will last!
Select options
This product has multiple variants. The options may be chosen on the product page
Are you looking for a good, tested weapon ESC for your antweight? This tried and tested ESC can do the job without breaking the bank! Pre-tuned to give your weapon more power at low RPM!
Want a tiny receiver for your robot? This tried and true FS2A receiver has been used in bots for years! Its tiny size makes it even easier to fit your electronics in your bot!
These 17T drive pulleys are great for belt driving beetleweight drivetrains. Now in both short and long versions. The larger diameter of the 17T pulleys keep more belt teeth in mesh, decreasing the odds of belt skipping and damage.
Select options
This product has multiple variants. The options may be chosen on the product page
Does your beetleweight need more drive power? Not happy with any of the options on the market? Tired of trying to put your own shafts into a 2xxx motor to get all the torque??? Repeat drive pro is modeled after the drivetrain that drove lynx to 3 world championship titles. Its a customized 24mm 27:1 gearbox with a massive 2207.5…
Select options
This product has multiple variants. The options may be chosen on the product page
Have you been looking for the easiest weapon solution for your antweight robot? Tired of dealing with belt drive or TPU hubs? The repeat 2207 battle ready hubmotor is ready to power your robot to victory! This motor has been tested by top bots across the US and now you can benefit from the reliability and durability of a custom…
Select options
This product has multiple variants. The options may be chosen on the product page
Have you wanted to build a tangent drive robot? Normal drone motors make structure challenging because the shafts come out the side opposite the mount. Now with repeat tangent drive motors, the shaft comes out the side where the mounting is, making tangent drive easier than ever before! Pair with repeat drive axles to take all the complexity out of…
Select options
This product has multiple variants. The options may be chosen on the product page
Need something to power your receiver on your robot? This BEC is cheap and reliable. It has been used in almost all of my personal robots, and is the first option I lean towards due to its small size and great reliability!
Have you been looking for a super light and compact brushed drive solution? Weighing only 45g, Repeat Compact is the lightest Beetleweight grade brushed drive on the market! Save weight without sacrificing durability with a billet hardened steel output shaft!
Repeat Drive Brushed has taken the market by storm. The planetary gearbox provides more durability than any other sized product, and the come with plenty of power to drive your Antweight robot to a trophy finish. Now paired with our new (and most importantly; cheap) dual ESCS, this bundle is everything you need to get started.' Please choose a combination…
Have you been bending your antweight drive motor shafts? Worry no longer. Now available, output shafts pre-assembled to the ring gear! Great to upgrade old motors for a bit more beef, or to stock as replacements at an event!
Select options
This product has multiple variants. The options may be chosen on the product page
Back in stock! These high power 2836 brushless motors are great for powering beetleweight vertical spinning weapons! These weapon motors are used in the peter bar kit robot and have been implemented in plenty of custom bots!
Bring some Lynx DNA to your robot! This switch is specifically designed to power on and off your 6s+ robot without sparking or eroding the contacts. On other switches, spark erosion reduces the amount of electrical contact the switch makes, resulting in heat, power restriction, or random switch failures. When you turn your bot on, there is a huge rush…
Been looking for an easy to use, off the shelf solution for 12 or 30lber direct drive gearboxes? These gearboxes come ready for combat, with extra large hardened steel output shafts, massive bearings, all in a compact package! These gearboxes are designed to mate to common 35xx outrunners or 36xx inrunners with 5mm shafts.
Select options
This product has multiple variants. The options may be chosen on the product page
Check out our new selection of 6mm wide V belts and pulleys designed specifically for 3lb robot weapon systems! Tried and tested on NHRL Golden Dumpster winner Knuckle Sandwich and MRCA Finals champion Pipeline Punch, these belts can take hits while protecting your motor from shock loading! These weapon systems are specifically designed to be near a drop in solution…
Select options
This product has multiple variants. The options may be chosen on the product page
Do you keep blowing up ESCs on your combat robot? Want to try out the benefits of AM32 without waiting weeks for shipping? This 70A esc can power even the craziest beetle weapons with ease! After testing, we have found that there is a software bug that can cause early failure with firmware V2.0 to V2.09 when used in…
Are you struggling finding a pulley to mount to your antweight weapon motor? This pulley is designed for just that! Great for any sort of belted weapon in an antweight! This pulley is designed to mount directly to the shaft of a 5mm shaft drone outrunner!
Designed by the inventors of the terrifying Weta and Saifu kitbots, NUTSTRIP is the perfect hardware solution to make assembling your robots faster and easier than ever before! Developed by the team over at www.kitbots.com Check out ways to use nutstrip at the Team Rolling Thunder site: http://www.teamrollingthunder.com/Kitbots/Nutstrip/body_nutstrip.html
Have you been looking for a weapon ESC to keep up with the most demanding weapons out there? What about a drive ESC for your bigger bots (12lb or 30lb)? Want a bigger bot esc that comes with a BEC to power your receiver? We've got an esc that does all of these things without breaking the bank! Used in…
Select options
This product has multiple variants. The options may be chosen on the product page
Have you been struggling to figure out four wheel drive? These wheels make it easy! Immediately ready to use with repeat drive axles, these wheels pair great with our 3M drive belts and repeat max for a quick and powerful drivetrain!
Select options
This product has multiple variants. The options may be chosen on the product page
Have you been struggling to figure out four wheel drive? These wheels make it easy! Immediately ready to use with repeat drive axles, these wheels pair great with our 3M drive belts and repeat max for a quick and powerful drivetrain!
Select options
This product has multiple variants. The options may be chosen on the product page
Have you been looking for an easy way to create a high power spinner on your next beetleweight? Want a mechanically robust hub motor that ties your frame rails together? Tired of worrying about belts and pulleys? The Repeat 2812 hub motor has been custom designed for the combat robotics community, with guidance from many award winning builders with 20+…
Select options
This product has multiple variants. The options may be chosen on the product page
Are you tired of stripping out the little M2 holes on the front of your repeat max gearbox? These upgrade faceplates have bigger M3 holes for facemount screws! Make your durable gearbox even stronger with this upgrade! Now available, Mk2 faceplates with a square machined into them to make securing your motor even easier!
Select options
This product has multiple variants. The options may be chosen on the product page
$6.00Original price was: $6.00.$5.00Current price is: $5.00.
Rated 5.00 out of 5
Did you break a shaft on your repeat Drive Max gearmotor? This is a single piece replacement shaft + c-clip for a repeat drive max 29:1 gearbox made from hardened 4130 steel.
$8.00Original price was: $8.00.$5.00Current price is: $5.00.
Do you want to customize your settings? Imagine a mini tech-whisperer for your ESCs. This tiny tool works for flashing your favorite escs including blheli_s, blheli_32, and AM32.
Do you have problems with voltage spikes wreaking havoc on your electrical system? Weapon hitting hard but the robot just turns off? This custom board uses TVS diodes to absorb dangerous voltage spikes in combat robots, which can fight electrical gremlins on robots with high voltage (4-6S) or high power weapon systems.
Select options
This product has multiple variants. The options may be chosen on the product page
Tired of your generic beater bar? Want the benefits of a drisk without having to test your design? Check out the Peter Bar: This tried and true drisk has powered robots through competitions around the nation. It hits hard and can survive abuse! This weapon assembly is used in our 3lb beetleweight kit robot, and has proven its power there.
Need something to spruce up your weapon lock? Want to show your support for repeat robotics? Want something snazzy to add to a keychain or a backpack? These remove before fight tags are a spin off the "remove before flight" tags that are common with aircraft. But instead, they remind you to take your weapon lock off before your fight…
Have you been looking for a super durable brushed drive solution? We put a high power 130 size motor on our durable Max gearboxes to create Repeat Max Brushed! Overkill in every way, these are the most durable option to power your beetleweight forward!
Select options
This product has multiple variants. The options may be chosen on the product page
Are you looking for something that packs more of a punch that your average Fingertech beater bot, something more “meta”? Repeat Robotics is proud to present the Peter Bar Kit: A new beetleweight (3lb) kit robot that aims to compete with the best out there! PBK bots have already proven themselves across the country, including 1st place results at Battle…
Introducing the Scalar 1lb Robot Kit from Repeat Robotics – your gateway to the thrilling world of robot combat! Unleash the power of destruction with this state-of-the-art kit. Whether you're a seasoned competitor or a newcomer to the world of combat robotics, the Scalar kit is designed for easy assembly, allowing you to focus on honing your driving while unleashing…
Tired of those pesky horizontals getting the better of you? Want to be able to tank their hits but don't know how? Introducing the 2mm Titanium wedge, designed for the peter bar kit but able to be used with all sorts of other bots. Tested on our own personal robots Ablation and Abomination, this wedge geometry has fought bots such…
Select options
This product has multiple variants. The options may be chosen on the product page
Do you need something to handle the thrust on your robot? These thrust bearings are perfect for your 5/16" shafted weapons, like a peter bar or an antweight horizontal! They'll keep your weapon spinning smooth!
Did you break a shaft on your Repeat Drive Ultra gearmotor? This is a single piece replacement shaft + c-clip for a repeat drive ultra gearbox made from hardened 4130 steel.
$14.00Original price was: $14.00.$13.00Current price is: $13.00.
Rated 5.00 out of 5
Scared to power on your robot for the first time? Tired of burning out electronic components due to wiring mistakes? The VIFLY ShortSaver V2 protects your circuit from shorts when you first power it on. Simply plug in your battery, then plug into your electronics harness. Then press the button on the ShortSaver to send power to the esc, all…
$8.00Original price was: $8.00.$7.00Current price is: $7.00.
Looking to tidy up the wiring in your antweight but XT30 connectors are too large? These A30 connectors are perfect for antweight sized loads and are way smaller than XT30s! Try them out now!
$32.00Original price was: $32.00.$27.50Current price is: $27.50.
Do you like the simplicity of brushed drive? Want a durable esc in a tiny form factor? The Dominion DESC has built-in overcurrent and overtemp protections that limit the output power, but let you keep going. All this in the smallest package on the market! Measuring just 20 x 20 x 2mm, this esc packs a punch above its size!…
$5.00Original price was: $5.00.$3.00Current price is: $3.00.
Introducing the latest merch item from Repeat Robotics: the multifunctional lanyard, a versatile accessory designed to hold radio transmitters securely while also attaching to keychains or nametags. It showcases the iconic Repeat Robotics logo and proudly displays our new rallying cry, "Build. Fight. Repeat." Whether you're in the heat of action or simply on the move, this lanyard is a…
Have you been looking for something to test your bot's current draw? Want to see how much power you pull? I personally use the ToolkitRC WM150 to measure power draw on my bots. It has a screen that shows tons of data including a graph of current draw during spinups that is great for testing. It also comes with an…
Did you break a shaft on your repeat Drive Magnum gearmotor? This is a single piece replacement shaft + c-clip for a Repeat Drive Magnum gearbox made from hardened 4130 steel.
Introducing the repeat robotics direct drive 2004, perfect for 150g robot weapons. We've taken the technology from our antweight scale direct drive motor and brought it down to the fairyweight scale!
Select options
This product has multiple variants. The options may be chosen on the product page
$40.00Original price was: $40.00.$35.00Current price is: $35.00.
Tired of getting beaten up by scalars? Need a durable wedge but don't want to bend your own titanium? The Repeat Ant Wedge is made from durable Grade 5 Titanium, specially bent without using heat in order to preserve the material properties. Mounting to your bot with 8x #4 plastite screws, a durable wedge for your spinner has never been…
$22.00Original price was: $22.00.$20.00Current price is: $20.00.
Looking for brushless escs but can't find anything small enough? The Micro AM32 esc is the smallest on the market at 12mm x 18mm! Take the size savings without sacrificing drive performance! Running AM32 firmware tuned for robot drivetrains these are great for 1lb or 3lb drive!
