Description

Mk2

• Made from gold anodized 6061-T6 aluminum
• End plate screws in with 2x M3 x 8mm flathead screws
• 0.75″ size hubs are held onto the shaft with 2x oversized M4 x 4mm setscrews
• 0.5″ size hubs are held onto the shaft with 1x oversized M4x4mm setscrews
• Come with holes for 3mm or #4 screws to mount a pulley to the inside of the hub
• Made for either 0.5″ or 0.75″ thick foam wheels
• New: Chamfer added to make installation easier
• New: Changed spline pattern to reduce wheel deformation
• New: Added rib on inner surface to prevent rubbing on chassis
• Weight
  • 3mm x 0.50″ – 13.7g
  • 4mm x 0.50″ – 13.4g
  • 3mm x 0.75″ – 17.85g
  • 4mm x 0.75″ – 17.4g
  • 6mm x 0.75″ – 12.45g

Mk 1 – Clearance sale!

• Made from gold anodized 6061-T6 aluminum
• End plate screws in with 2x M3 x 8mm flathead screws
• Hubs are held onto the shaft with 2x oversized M4 x 4mm setscrews
• Come with holes for 3mm or #4 screws to mount a pulley to the inside of the hub
• Made for .75″ wide foam wheels, commonly sold by Fingertech robotics
• 6mm weight – 15g per pair

Purchase comes with 2 pcs gold hub.

Find the V1 3D model here: https://grabcad.com/library/repeat-gold-eco-hub-pair-1

Find the V2 3D model here: https://grabcad.com/library/repeat-gold-eco-hub-mk2-1