-
- Sale!
- Antweight, Drive Motors, Repeat Drive Brushed
Repeat Drive Brushed Mk2 3mm shaft (1pcs)
- Original price was: $20.00.$19.00Current price is: $19.00.
- Have you stripped the gearboxes on your drive motors leaving your bot stranded in the arena? Scared of the cost and complexity of brushless drive? I have the solution you've been waiting for. Enter Repeat Drive Brushed Mk2. More powerful motors that run cooler and give you even more performance.
- Add to cart
-
- Sale!
- Antweight, Beetleweight, Hardware
Repeat Gold Foam Eco Hub (2pcs)
- $7.50 – $15.00
- Need a cheap way to attach foam wheels to your bot? Want gold rims on your next bot? Repeat Foam Eco Hubs are here! Designed for maximum performance at a low price, these hubs look great while doing it! Now with a second generation design boasting several improvements on the first version!
- Select options
-
- Beetleweight, Hardware, Peter Bar Kit
Ant/Beetle Drive Belts
- $2.00
- These belts are perfect for four wheel drive Antweight or Beetleweight designs! Sourced for our popular Peter Bar Kit robot, you know these belts will last!
- Select options
-
- Antweight
Repeat 2822
- $20.00
- The cheap orange 2822 airplane motor has been used successfully in plenty of antweights, and it seems to work great! I've gone ahead and made my own custom version of a 2822 designed specifically for antweight robot weapons.
- Select options
-
- Out of Stock
- Antweight, Beetleweight, Electronics, Hardware
Fingertech Switch
- $9.00
- Need a switch to safely power your robot on or off? The fingertech switch has been used by builders for decades and is great for 2S-4S 1lb and 3lb robot systems! Pick yours up from repeat robotics today!
- Read more
-
-
- Antweight, Beetleweight, Hardware
Repeat Gold Screw Hub (2pcs)
- $7.50
- Need a cheap way to attach custom wheels to your next bot? Repeat robotics Gold Screw Hub are designed to custom mount antweight and beetleweight bots wheels!
- Select options
-
- Antweight, Electronics
Readytosky 35A blheli_s Ant Weapon ESC
- $13.50
- Are you looking for a good, tested weapon ESC for your antweight? This tried and tested ESC can do the job without breaking the bank! Pre-tuned to give your weapon more power at low RPM!
- Add to cart
-
- Beetleweight, Electronics
Readytosky 45A blheli_s – Beetle Weapon ESC
- $15.00
- Are you looking for a good, tested weapon ESC for your antweight or beetleweight? This tried and tested ESC can do the job without breaking the bank!
- Add to cart
-
- Antweight, Drive Motors, Repeat Drive Mini
Repeat Mini – Mk3 4mm shaft (1pcs)
- $40.00
- Does your antweight suffer from a lack of drive power? Have you stripped the gearboxes on your drive motors leaving your bot stranded in the arena? I too have suffered from these problems. That's why I started developing the first off-the-shelf 16mm brushless gearmotors to be sold to combat robot builders. Repeat drive mini Mk3 is the upgraded version of…
- Add to cart
-
- Antweight, Beetleweight, Bigger Bots (12lb & 30lb), Electronics
Micro 5V/12V BEC
- $5.00
- Need something to power your receiver on your robot? This BEC is cheap and reliable. It has been used in almost all of my personal robots, and is the first option I lean towards due to its small size and great reliability!
- Add to cart
-
- Antweight, Beetleweight, Electronics
Flysky FS2A Receiver
- $13.00
- Want a tiny receiver for your robot? This tried and true FS2A receiver has been used in bots for years! Its tiny size makes it even easier to fit your electronics in your bot!
- Add to cart
-
- Antweight, Drive Motors, Motor Accessories, Repeat Drive Brushed, Repeat Drive Mini
Repeat Drive 4mm shaft replacement
- $5.50
- Have you been bending your antweight drive motor shafts? Worry no longer. Now available, output shafts pre-assembled to the ring gear! Great to upgrade old motors for a bit more beef, or to stock as replacements at an event!
- Select options
-
- Out of Stock
- Antweight, Beetleweight, Drive Motors
Repeat Compact 1806
- $45.00
- Introducing repeat compact, the lightest brushless beetle drive motor on the market! Lightweight doesn't sacrifice build quality or durability, this motor has a hardened steel 4mm billet output shaft. Power comes from a brushless 1806 motor integrated directly into the gearbox! Similar 1806 brushless motors with 22mm planetary gearboxes have driven beetleweights for years!
- Read more
-
-
- Out of Stock
- Beetleweight, Peter Bar Kit
Repeat 2836 brushless motor
- $20.00
- Back in stock! These high power 2836 brushless motors are great for powering beetleweight vertical spinning weapons! These weapon motors are used in the peter bar kit robot and have been implemented in plenty of custom bots!
- Read more
-
-
- Out of Stock
- Antweight, Drive Motors, Motor Accessories, Repeat Drive Brushed
Repeat Drive Brushed Mk2 Replacement Motor
- $4.00
- Want to upgrade your repeat brushed mk1 to use the more powerful mk2 motor? Just want a replacement motor to keep in your box of spares? Now available, the repeat drive brushed mk2 replacement motor
- Read more
-
-
- Out of Stock
- Antweight, Drive Motors, Repeat Drive Mini
Repeat Mini Mk3 replacement motor
- $20.00
- Have you burned out one of your repeat drive mini mk3? Or do you want to upgrade your earlier versions? Now you can! Introducing the repeat mini mk3 replacement 1204 motor!
- Read more
-
-
- Antweight, Beetleweight, Drive Motors
Repeat Compact Brushed
- $26.00
- Have you been looking for a super light and compact brushed drive solution? Weighing only 45g, Repeat Compact is the lightest Beetleweight grade brushed drive on the market! Save weight without sacrificing durability with a billet hardened steel output shaft!
- Add to cart
-
- Sale!
- Antweight, Hardware
Repeat Ant Motor Mount (2pcs)
- Original price was: $4.00.$3.50Current price is: $3.50.
- Have you been looking for a clean way to mount your antweight drive motors? Look no further!
- Add to cart
-
- Out of StockSale!
- Antweight, Motor Accessories, Repeat Drive Brushed
Repeat Drive Brushed Replacement Motor
- Original price was: $4.00.$2.00Current price is: $2.00.
- THESE MOTORS HAVE BEEN REPLACED WITH BRUSHED MK2: https://repeat-robotics.com/buy/repeat-drive-brushed-mk2-replacement-motor/ Worried that you might break the brushed motor on your repeat drive motor? Now available for purchase, repeat drive brushed replacement motors!
- Read more
-
-
- Sale!
- Beetleweight, Drive Motors, Hardware, Repeat Drive Max
Repeat Max M3 Faceplate Upgrade
- $2.00 – $5.00
- Are you tired of stripping out the little M2 holes on the front of your repeat max gearbox? These upgrade faceplates have bigger M3 holes for facemount screws! Make your durable gearbox even stronger with this upgrade! Now available, Mk2 faceplates with a square machined into them to make securing your motor even easier!
- Select options
-
- Beetleweight, Hardware, Peter Bar Kit
Repeat Max Motor Mounts (2pcs)
- $5.00
- Have you been looking for a solution to mount your repeat max motors? Look no further!
- Add to cart
-
- Sale!
- Hardware, Peter Bar Kit
195-3M-09 (Peter Bar Weapon Belt)
- Original price was: $5.00.$4.00Current price is: $4.00.
- Add to cart
-
- Antweight, Beetleweight, Hardware
Nutstrip MiniBlock 3 (2pcs)
- $4.00
- Designed by the inventors of the terrifying Weta and Saifu kitbots, NUTSTRIP is the perfect hardware solution to make assembling your robots faster and easier than ever before! Developed by the team over at www.kitbots.com Check out ways to use nutstrip at the Team Rolling Thunder site: http://www.teamrollingthunder.com/Kitbots/Nutstrip/body_nutstrip.html
- Add to cart
-
- Antweight, Beetleweight, Electronics
Lynx Anti-Spark Switch
- $12.50
- Bring some Lynx DNA to your robot! This switch is specifically designed to power on and off your 6s+ robot without sparking or eroding the contacts. On other switches, spark erosion reduces the amount of electrical contact the switch makes, resulting in heat, power restriction, or random switch failures. When you turn your bot on, there is a huge rush…
- Add to cart
-
- Beetleweight, Hardware, Peter Bar Kit
Peter Bar Kit – Front Wheels (2pcs)
- $8.00
- Have you been struggling to figure out four wheel drive? These wheels make it easy! Immediately ready to use with repeat drive axles, these wheels pair great with our 3M drive belts and repeat max for a quick and powerful drivetrain!
- Add to cart
-
- Antweight, Hardware
Ant Weapon Pulley – 18T-3m-05
- $6.00
- Are you struggling finding a pulley to mount to your antweight weapon motor? This pulley is designed for just that! Great for any sort of belted weapon in an antweight! This pulley is designed to mount directly to the shaft of a 5mm shaft drone outrunner!
- Add to cart
-
- Hardware, Merch
Power Key – 3/32in
- $5.00
- Constantly looking for a robot power key? Look no more!
- Add to cart
-
- Beetleweight, Hardware, Peter Bar Kit
Peter Bar Kit – Rear Wheels (2pcs)
- $8.00
- Have you been struggling to figure out four wheel drive? These wheels make it easy! Immediately ready to use with repeat drive axles, these wheels pair great with our 3M drive belts and repeat max for a quick and powerful drivetrain!
- Add to cart
-
- Beetleweight, Electronics
NeutronRC 70A-G071 Beetle Weapon ESC
- $50.00
- Do you keep blowing up ESCs on your combat robot? Want to try out the benefits of AM32 without waiting weeks for shipping? This 70A esc can power even the craziest beetle weapons with ease! After testing, we have found that there is a software bug that can cause early failure with firmware V2.0 to V2.09. We recommend reverting…
- Add to cart
-
- Beetleweight, Peter Bar Kit
Peter Bar Weapon kit
- $55.00
- Tired of your generic beater bar? Want the benefits of a drisk without having to test your design? Check out the Peter Bar: This tried and true drisk has powered robots through competitions around the nation. It hits hard and can survive abuse! This weapon assembly is used in our 3lb beetleweight kit robot, and has proven its power there.
- Add to cart
-
- Sale!
- Beetleweight, Electronics
Repeat Beetle Brushed DESC 2x15A
- Original price was: $25.00.$20.00Current price is: $20.00.
- Looking for a cheap option to drive your brushed motors on your 3lb robot? This is it! Great for driving repeat compact brushed or repeat max brushed
- Add to cart
-
- Bigger Bots (12lb & 30lb), Drive Motors, Hardware
Repeat Ultra Gearbox Mk2
- $40.00
- Do you need a light and small gearbox for your 12lb robot? Want repeat ultra but with a badass motor? Here's your chance!
- Add to cart
-
- Out of Stock
- Beetleweight, Peter Bar Kit
Peter Bar Kit – Electronics Bundle
- $32.00
- Read more
-
-
- Antweight, Hardware, Scalar Robot Kit
Scalar Weapon Shaft
- $15.00
- Need a spare weapon shaft for your antweight horizontal? We've got you covered
- Add to cart
-
- Out of Stock
- Beetleweight, Peter Bar Kit
Peter Bar Kit – Frame
- $120.00
- Read more
-
-
- Sale!
- Antweight, Hardware, Scalar Robot Kit
267-3M-05 (Scalar Weapon Belt)
- Original price was: $5.00.$4.00Current price is: $4.00.
- Add to cart
-
- Out of Stock
- Peter Bar Kit
Peter Bar Kit – Hardware Kit
- $98.00
- Read more
-
-
- Sale!
- Antweight, Beetleweight, Hardware, Motor Accessories
Repeat Compact 22mm ring gear
- Original price was: $4.00.$3.50Current price is: $3.50.
- Are your 22mm planetary gearboxes too heavy? This ring gear swaps into most 22mm planetary gearboxes and removes unneccessary weight from the ring gear! Save up to 8g compared to other 22mm ring gears.
- Add to cart
-
- Sale!
- Antweight, Hardware, Scalar Robot Kit
Scalar Weapon Hub
- Original price was: $35.00.$30.00Current price is: $30.00.
- Need a spare weapon hub for your antweight horizontal? We've got you covered
- Add to cart
-
- Antweight, Drive Motors, Repeat Drive Mini
Repeat Mini HR – Mk3
- $44.00
- Do you need mo' torqqqq in your robot? Repeat drive mk3 HR is the perfect solution for hammersaws, lifters, or bigwheel robots!
- Select options
-
- Sale!
- Beetleweight, Drive Motors, Repeat Drive Max
Repeat Max Brushed
- Original price was: $35.00.$30.00Current price is: $30.00.
- Have you been looking for a super durable brushed drive solution? We put a high power 130 size motor on our durable Max gearboxes to create Repeat Max Brushed! Overkill in every way, these are the most durable option to power your beetleweight forward!
- Add to cart
-
- Beetleweight, Peter Bar Kit
Beetleweight Wedge
- $75.00 – $80.00
- Tired of those pesky horizontals getting the better of you? Want to be able to tank their hits but don't know how? Introducing the 2mm Titanium wedge, designed for the peter bar kit but able to be used with all sorts of other bots. Tested on our own personal robots Ablation and Abomination, this wedge geometry has fought bots such…
- Select options
-
- Out of Stock
- Peter Bar Kit
Peter Bar Kit – Printed TPU Parts
- $50.00
- Read more
-
-
- Out of Stock
- Bigger Bots (12lb & 30lb), Hardware, Motor Accessories
Repeat Drive Ultra Replacement Shaft
- $7.50
- Did you break a shaft on your Repeat Drive Ultra gearmotor? This is a single piece replacement shaft + c-clip for a repeat drive ultra gearbox made from hardened 4130 steel.
- Read more
-
-
- Out of Stock
- Hardware, Peter Bar Kit
Peter Bar Kit – Spare Frame Standoffs
- $10.00
- Read more
-
-
- Beetleweight, Hardware
V Belts and Pulleys
- $5.00 – $12.00
- Check out our new selection of 6mm wide V belts and pulleys designed specifically for 3lb robot weapon systems! Tried and tested on Knuckle Sandwich and Repeater, these belts can take hits while protecting your motor from shock loading! These weapon systems are specifically designed to be near a drop in solution for your standard FTBB weapon system.
- Select options
-
- Antweight, Beetleweight, Hardware, Peter Bar Kit
TC512 5/16″ needle thrust bearing (2pcs)
- $6.00
- Do you need something to handle the thrust on your robot? These thrust bearings are perfect for your 5/16" shafted weapons, like a peter bar or an antweight horizontal! They'll keep your weapon spinning smooth!
- Add to cart
-
- Antweight, Scalar Robot Kit
Scalar Kit 3D printed TPU Frame
- $25.00
- This is the 3D printed frame parts for the Scalar Robot Kit
- Add to cart
-
- Sale!
- Merch
Repeat Lanyard
- Original price was: $5.00.$3.00Current price is: $3.00.
- Introducing the latest merch item from Repeat Robotics: the multifunctional lanyard, a versatile accessory designed to hold radio transmitters securely while also attaching to keychains or nametags. It showcases the iconic Repeat Robotics logo and proudly displays our new rallying cry, "Build. Fight. Repeat." Whether you're in the heat of action or simply on the move, this lanyard is a…
- Add to cart
-
- Out of Stock
- Bigger Bots (12lb & 30lb), Hardware
Repeat Magnum spare pinion gear
- $2.50
- Read more
-
-
- Sale!
- Uncategorized
USB to ESC Programming Tool
- Original price was: $8.00.$5.00Current price is: $5.00.
- Do you want to customize your settings? Imagine a mini tech-whisperer for your ESCs. This tiny tool works for flashing your favorite escs including blheli_s, blheli_32, and AM32.
- Add to cart
-
- Sale!
- Antweight, Electronics
EMAX D-SHOT Bullet Series 30A ESC (BLHELI_S)
- Original price was: $22.80.$12.00Current price is: $12.00.
- Does your fairyweight need a tiny weapon ESC? Tired of fitting big speed controllers in your bot? This EMax Bullet 30A ESC is super tiny and super powerful!
- Add to cart
-
- Bigger Bots (12lb & 30lb), Hardware, Motor Accessories
Repeat Drive Magnum Replacement Shaft
- $9.00
- Did you break a shaft on your repeat Drive Magnum gearmotor? This is a single piece replacement shaft + c-clip for a Repeat Drive Magnum gearbox made from hardened 4130 steel.
- Add to cart