These products are intended for use with Antweight (1lb) robots
-
- Sale!
- Antweight, Drive Motors, Repeat Drive Brushed
Repeat Drive Brushed Mk2 3mm shaft (1pcs)
- Original price was: $20.00.$19.00Current price is: $19.00.
- Have you stripped the gearboxes on your drive motors leaving your bot stranded in the arena? Scared of the cost and complexity of brushless drive? I have the solution you've been waiting for. Enter Repeat Drive Brushed Mk2. More powerful motors that run cooler and give you even more performance.
- Add to cart
-
- Sale!
- Antweight, Beetleweight, Hardware
Repeat Gold Foam Eco Hub (2pcs)
- $7.50 – $15.00
- Need a cheap way to attach foam wheels to your bot? Want gold rims on your next bot? Repeat Foam Eco Hubs are here! Designed for maximum performance at a low price, these hubs look great while doing it! Now with a second generation design boasting several improvements on the first version!
- Select options
-
- Antweight
Repeat 2822
- $20.00
- The cheap orange 2822 airplane motor has been used successfully in plenty of antweights, and it seems to work great! I've gone ahead and made my own custom version of a 2822 designed specifically for antweight robot weapons.
- Select options
-
- Out of Stock
- Antweight, Beetleweight, Electronics, Hardware
Fingertech Switch
- $9.00
- Need a switch to safely power your robot on or off? The fingertech switch has been used by builders for decades and is great for 2S-4S 1lb and 3lb robot systems! Pick yours up from repeat robotics today!
- Read more
-
-
- Antweight, Beetleweight, Hardware
Repeat Gold Screw Hub (2pcs)
- $7.50
- Need a cheap way to attach custom wheels to your next bot? Repeat robotics Gold Screw Hub are designed to custom mount antweight and beetleweight bots wheels!
- Select options
-
- Antweight, Electronics
Readytosky 35A blheli_s Ant Weapon ESC
- $13.50
- Are you looking for a good, tested weapon ESC for your antweight? This tried and tested ESC can do the job without breaking the bank! Pre-tuned to give your weapon more power at low RPM!
- Add to cart
-
- Antweight, Beetleweight, Bigger Bots (12lb & 30lb), Electronics
Micro 5V/12V BEC
- $5.00
- Need something to power your receiver on your robot? This BEC is cheap and reliable. It has been used in almost all of my personal robots, and is the first option I lean towards due to its small size and great reliability!
- Add to cart
-
- Antweight, Drive Motors, Repeat Drive Mini
Repeat Mini – Mk3 4mm shaft (1pcs)
- $40.00
- Does your antweight suffer from a lack of drive power? Have you stripped the gearboxes on your drive motors leaving your bot stranded in the arena? I too have suffered from these problems. That's why I started developing the first off-the-shelf 16mm brushless gearmotors to be sold to combat robot builders. Repeat drive mini Mk3 is the upgraded version of…
- Add to cart
-
- Antweight, Beetleweight, Electronics
Flysky FS2A Receiver
- $13.00
- Want a tiny receiver for your robot? This tried and true FS2A receiver has been used in bots for years! Its tiny size makes it even easier to fit your electronics in your bot!
- Add to cart
-
- Antweight, Drive Motors, Motor Accessories, Repeat Drive Brushed, Repeat Drive Mini
Repeat Drive 4mm shaft replacement
- $5.50
- Have you been bending your antweight drive motor shafts? Worry no longer. Now available, output shafts pre-assembled to the ring gear! Great to upgrade old motors for a bit more beef, or to stock as replacements at an event!
- Select options
-
- Out of Stock
- Antweight, Beetleweight, Drive Motors
Repeat Compact 1806
- $45.00
- Introducing repeat compact, the lightest brushless beetle drive motor on the market! Lightweight doesn't sacrifice build quality or durability, this motor has a hardened steel 4mm billet output shaft. Power comes from a brushless 1806 motor integrated directly into the gearbox! Similar 1806 brushless motors with 22mm planetary gearboxes have driven beetleweights for years!
- Read more
-
-
- Out of Stock
- Antweight, Drive Motors, Motor Accessories, Repeat Drive Brushed
Repeat Drive Brushed Mk2 Replacement Motor
- $4.00
- Want to upgrade your repeat brushed mk1 to use the more powerful mk2 motor? Just want a replacement motor to keep in your box of spares? Now available, the repeat drive brushed mk2 replacement motor
- Read more
-
-
- Antweight, Drive Motors, Repeat Drive Mini
Repeat Mini Mk3 replacement motor
- $20.00
- Have you burned out one of your repeat drive mini mk3? Or do you want to upgrade your earlier versions? Now you can! Introducing the repeat mini mk3 replacement 1204 motor!
- Add to cart
-
- Antweight, Beetleweight, Drive Motors
Repeat Compact Brushed
- $26.00
- Have you been looking for a super light and compact brushed drive solution? Weighing only 45g, Repeat Compact is the lightest Beetleweight grade brushed drive on the market! Save weight without sacrificing durability with a billet hardened steel output shaft!
- Add to cart
-
- Sale!
- Antweight, Hardware
Repeat Ant Motor Mount (2pcs)
- Original price was: $4.00.$3.50Current price is: $3.50.
- Have you been looking for a clean way to mount your antweight drive motors? Look no further!
- Add to cart
-
- Out of StockSale!
- Antweight, Motor Accessories, Repeat Drive Brushed
Repeat Drive Brushed Replacement Motor
- Original price was: $4.00.$2.00Current price is: $2.00.
- THESE MOTORS HAVE BEEN REPLACED WITH BRUSHED MK2: https://repeat-robotics.com/buy/repeat-drive-brushed-mk2-replacement-motor/ Worried that you might break the brushed motor on your repeat drive motor? Now available for purchase, repeat drive brushed replacement motors!
- Read more
-
-
- Antweight, Beetleweight, Hardware
Nutstrip MiniBlock 3 (2pcs)
- $4.00
- Designed by the inventors of the terrifying Weta and Saifu kitbots, NUTSTRIP is the perfect hardware solution to make assembling your robots faster and easier than ever before! Developed by the team over at www.kitbots.com Check out ways to use nutstrip at the Team Rolling Thunder site: http://www.teamrollingthunder.com/Kitbots/Nutstrip/body_nutstrip.html
- Add to cart
-
- Antweight, Beetleweight, Electronics
Lynx Anti-Spark Switch
- $12.50
- Bring some Lynx DNA to your robot! This switch is specifically designed to power on and off your 6s+ robot without sparking or eroding the contacts. On other switches, spark erosion reduces the amount of electrical contact the switch makes, resulting in heat, power restriction, or random switch failures. When you turn your bot on, there is a huge rush…
- Add to cart
-
- Antweight, Hardware
Ant Weapon Pulley – 18T-3m-05
- $6.00
- Are you struggling finding a pulley to mount to your antweight weapon motor? This pulley is designed for just that! Great for any sort of belted weapon in an antweight! This pulley is designed to mount directly to the shaft of a 5mm shaft drone outrunner!
- Add to cart
-
- Antweight, Hardware, Scalar Robot Kit
Scalar Weapon Shaft
- $15.00
- Need a spare weapon shaft for your antweight horizontal? We've got you covered
- Add to cart
-
- Sale!
- Antweight, Hardware, Scalar Robot Kit
267-3M-05 (Scalar Weapon Belt)
- Original price was: $5.00.$4.00Current price is: $4.00.
- Add to cart
-
- Sale!
- Antweight, Hardware, Scalar Robot Kit
Scalar Weapon Hub
- Original price was: $35.00.$30.00Current price is: $30.00.
- Need a spare weapon hub for your antweight horizontal? We've got you covered
- Add to cart
-
- Sale!
- Antweight, Beetleweight, Hardware, Motor Accessories
Repeat Compact 22mm ring gear
- Original price was: $4.00.$3.50Current price is: $3.50.
- Are your 22mm planetary gearboxes too heavy? This ring gear swaps into most 22mm planetary gearboxes and removes unneccessary weight from the ring gear! Save up to 8g compared to other 22mm ring gears.
- Add to cart
-
- Antweight, Drive Motors, Repeat Drive Mini
Repeat Mini HR – Mk3
- $44.00
- Do you need mo' torqqqq in your robot? Repeat drive mk3 HR is the perfect solution for hammersaws, lifters, or bigwheel robots!
- Select options
-
- Antweight, Beetleweight, Hardware, Peter Bar Kit
TC512 5/16″ needle thrust bearing (2pcs)
- $6.00
- Do you need something to handle the thrust on your robot? These thrust bearings are perfect for your 5/16" shafted weapons, like a peter bar or an antweight horizontal! They'll keep your weapon spinning smooth!
- Add to cart
-
- Antweight, Scalar Robot Kit
Scalar Kit 3D printed TPU Frame
- $25.00
- This is the 3D printed frame parts for the Scalar Robot Kit
- Add to cart
-
- Sale!
- Antweight, Electronics
EMAX D-SHOT Bullet Series 30A ESC (BLHELI_S)
- Original price was: $22.80.$12.00Current price is: $12.00.
- Does your fairyweight need a tiny weapon ESC? Tired of fitting big speed controllers in your bot? This EMax Bullet 30A ESC is super tiny and super powerful!
- Add to cart