Description

Tech specs:

• Stator size: 2812
• 175g without wires
• 182.5g with full length wires
• 195.6g with blade mounting hardware
• Large 6805 and 6000 bearings
• Ring bearing held in by 2x M3 screws
• M4x18.5mm motor mount pattern
• M5 weapon mount screws
• Works with blades from 1/8” thick to 1/2” thick.
• Overall dimensions: 2.28in max diameter by 1.375in length
• Comes with battle hardened magnet ring (also available separately)
• Magnet ring can be removed via 4x 3mm pins
• Extra long wires to span even the widest of robots.
• 3 kv options: 800, 1300, 1800
• Recommended for 3S-6S usage. Be sure to choose your kv for a reasonable tip speed to avoid burning out your motor.

Notes for use:

• 5/16″ shoulder bolt or other similar through shaft is required for use. Without the shoulder bolt the rotor is not fully constrained and may be damaged.
• When designing the blade, the tooth portion should line up with the 2 screws at the top. This provides the most optimal loading scenario with maximum strength. Three tooth weapon designs are not recommended.

The motors have been tested on many bots, including:

• Elytra
• Nautiloid
• Prince
• Rorschach
• Venator
• Je ne sais quoi

Find the 3D model here: https://grabcad.com/library/repeat-2812-beetleweight-hubmotor-1

Works great with the Neutron 70A weapon esc: https://repeat-robotics.com/buy/neutronrc-70a-g071-beetle-weapon-esc/